| About This Guide | 6
About This Guide
Thank you for choosing Yealink MP56/T58A/T56A Teams phone, which is mainly designed to work with the
Microsoft Teams client. This guide provides everything you need to quickly use your new device. Firstly,
verify with your system administrator that the IP network is ready for device configuration. Also, be sure to
read the Quick Start Guide in the product package.
• Related Documentations
Related Documentations
You can find the following types of documents from each product support page on Yealink Support:
• Release Notes: This guide describes what’s new for a new device firmware.
• Quick Start Guide: This guide describes the contents of your package, how to assemble the device or
accessory, and how to use the basic features. This guide is also included in your device package.
• Administrator Guide: This guide provides detailed information about setting up your network and
configuring features.
• Regulatory Notice: This guide provides information for all regulatory and safety guidance.
Getting Started
This chapter aims to make you familiar with the phone user interface.
Note: As you read this guide, keep in mind that some features are configurable by your system
administrator or determined by your device environment. As a result, some features may not be
enabled or may be operated differently on your device. Additionally, the examples and graphics in
this guide may not directly reflect what is displayed or is available on your device.
• T58A and T56A Hardwares
• MP56 Hardware
• Power LED Indicator
• Accessing Screens on Yealink Teams Phones
• Entering Data and Editing Fields
T58A and T56A Hardwares
The following figure displays the hardware features on the T58A and T56A phones. The table lists each
feature numbered in the figure.
To Next Page
Loading...
Need help?
General
