User Guide for the VC800 Video Conferencing System
88
Audio Input Device
The system supports the following audio input devices:
Auto (select the audio input device with the highest priority)
VCS Phone (CP960 conference phone)
VCS Phone+Wireless Micpod (CP960 conference phone+CPW90 wireless expansion mic)
Line Input (microphone connected to the Line In port on the VC800 codec)
The priority of audio input device is:
By default, the VC800 automatically selects the audio input devices with the highest priority. If
you select “VCS Phone + Wireless Micpod” option, the VC800 will use CP960 conference phone
and CPW90 expansion mic to pick up audio at the same time.
To configure the audio input device via the remote control:
1. Select (More menu).
2. Press or to scroll to Setting and then press to expand the menu.
3. Press or to scroll to Video & Audio and then press to enter submenu.
4. Press or to scroll to Audio Settings and then press .
5. Select desired audio output device from the pull-down list of Audio Input.
If VCS Phone is selected as the audio output device manually or automatically, the audio
input device must be VCS Phone or VCS Phone+Wireless Micpod.
6. Press or to select Save and then press to accept the change.
To Next Page
Loading...
