Overview
19
User Interfaces
There are two ways to customize the configurations of your VC800 video conferencing system:
Web User Interface
Remote Control
Note
Web User Interface
You can customize your system via web user interface. To access the web user interface, you
need to know the IP address of your new system.
To obtain the IP address, do one of the following:
The IP address of the system is shown on the top right corner of the display device.
Select (More menu), and then select Status ->Network.
The display device shows network information about the system.
Tap ->Network on the CP960 conference phone.
The touch screen of the CP960 conference phone displays the network information.
Log into the web user interface:
1. Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of a web
browser on your PC, and then press the Enter key.
2. Enter the administrator user name and password.
The default user name is “admin” (case-sensitive), and the default password is “0000”.
The display device and remote control constitute the system user interface. This allows the user
to execute all call operation tasks and basic configuration changes directly. Detailed operational
steps will be explained in the feature section.
To Next Page
Loading...
