Yealink VC800 - LED Instructions

User Guide for the VC800 Video Conferencing System
18
LED Instructions
Indicator LED on the VC800 codec:
LED Status
Description
Solid green
The VC800 codec is powered on.
The VC800 codec is upgrading firmware.
Solid red
The VC800 codec is in sleep mode.
Solid orange
System exception (e.g., network unavailable, update failure).
Off
The VC800 codec is powered off, or is not connected to the
power adapter.
Indicator LED on the CP960:
LED Status
Description
Solid red
The CP960 conference phone is initializing.
The CP960 conference phone is muted when the VC800 is during a
call.
Flashing red
The CP960 conference phone is ringing.
Solid green
The CP960 conference phone is placing a call.
There is an active call on the CP960 conference phone.
Off
The CP960 conference phone is idle.
The CP960 conference phone is not connected to the VC800
correctly.
Mute Indicator LED on the CPE90 Wired Expansion Mic:
LED Status
Description
Solid red
The CPE90 is muted when the VC800 is during a call.
Flashing red
The VC800 is ringing.
Solid green
The VC800 is placing a call.
The CPE90 is unmuted when the VC800 is during a call.
Off
The CPE90 is not connected to the CP960 conference
phone.
The CPE90 is idle.