User Guide for the VC800 Video Conferencing System
20
3. Click Login.
After you log into the web user interface successfully, you can click Logout on the top
right corner of the web interface to log out.
Remote Control
You can use the remote control to configure and use the VC800 video conferencing system. For
more information on the function of each key on the remote control, refer to VCR11 Remote
Control on page 13.
The Advanced option is only accessible to the administrator. The default administrator
password is “0000”. For more information on how to view, enter and edit the menu settings on
the display device, refer to Navigating Menus and Fields on page 32 and Entering Data and
Editing Fields on page 35.
Virtual Remote Control
In addition to using the remote control, you can also control the VC800 video conferencing
system via virtual remote control.
To control VC800 video conferencing system via the virtual remote control:
1. Click Home->Remote Control when the system is idle or during a call.
2. Click the keys on the virtual remote control to control the VC800 video conferencing
system.
3. Click Remote Control to hide the virtual remote control.
To Next Page
Loading...
