Yealink VC800 - Put the System to Sleep

Getting Started
27
with the supplied power adapter.
The VC800 video conferencing system starts up automatically, and the indicator LED on the
VC800 codec then illuminates solid green.
Put the System to Sleep
After a certain amount of time with no activity, the VC800 video conferencing system goes into
sleep mode automatically.
Put the system to sleep via the remote control:
1. Press .
2. Press or to scroll to Sleep and then press .
The system goes to sleep immediately. The indicator LED on the VC800 codec illuminates
solid red.
Wake the system via the remote control:
1. Press any button on the remote control.
The indicator LED on the VC800 codec illuminates solid green.
Wake the system via theCP960 conference phone:
1. Tap the touch screen or any key.
The indicator LED on the VC800 codec illuminates solid green.