Yealink VC800 - Camera Issues

Using the CPW90 Wireless Expansion Mic
171
Using the CPW90 Wireless Expansion Mic
This chapter provides basic operating instructions for the CPW90 Wireless Expansion Mic. Topics
include:
 LED Instructions
 Charging the CPW90
 Turning the CPW90 On or Off
 Registering CPW90 to the CP960 Conference Phone
 Viewing CPW90 Information
 Muting or Unmuting the CPW90
 Finding the Registered CPW90
 Working Frequency
If you require additional information or assistance with your new phone, contact your system
administrator.
LED Instructions
Battery indicator LED on the CPW90 wireless expansion mic:
LED Status
Description
Solid green for one second
and then off
The CPW90 is turned on.
Solid green for 3 seconds
and then off
The CPW90 is in the idle mode.
Solid green
The CPW90 is fully charged.
Solid red
The CPW90 is being charged.
Fast flashing red 3 times
and then off
The battery capacity is too low to turn on the CPW90.
Slowly flashing red
The battery capacity is less than 10%.
Off
If you tap the mute button, the battery indicator LED on the
CPW90 is still off, it means the CPW90 is turned off.
Mute indicator LED on the CPW90 wireless expansion mic:
LED Status
Description
Solid green
The CP960 conference phone enters the pre-dialing
screen.