User Guide for the VC800 Video Conferencing System
22
Connecting the VC800 Codec
1. Connect the LAN port on the VC800 codec to a switch/hub device port with the supplied
3m Ethernet cable.
2. Locate the HDMI port on the VC800 codec, and connect it to the HDMI port on the display
device with the supplied HDMI cable (Make sure the display device is powered on).
3. Locate the VC Hub/Phone port on the VC800 codec, and connect it to the Codec port on
the VCH50 video conferencing hub using 7.5m Ethernet cable.
4. Do one of the following to share contents:
- Locate the HDMI port on the VCH50 video conferencing hub, and connect it to the
HDMI port on the PC with the supplied HDMI cable. So that you can share contents
during a call.
- Locate the MINI DP port on the VCH50 video conferencing hub, and connect it to the
MINI DP port on the PC with the supplied MINI DP cable. So that you can share
contents during a call.
5. Locate the Audio port on the VCH50 video conferencing hub, and connect it to the
Internet port on the CP960 conference phone.
To Next Page
Loading...
