Yealink VC800 - VCH50 Video Conferencing Hub

Overview
7
Port Name
Description
Note: If two USB flash drives are connected, only the latter
one can be identified.
④
VC Hub/Phone
 If you want to share contents, connect this port to the
Codec port on the VCH50 video conferencing hub.
 If you need an audio device, connect this port to the
Internet port on the CP960 Conference phone.
⑤
HDMI 1
Connects to a display device for displaying video images.
⑥
HDMI 2
Connects to secondary display device for displaying video
images.
⑦
LAN
Connects to the network device.
⑧
DC48V
Connects to the power source via a power adapter.
⑨
Reset Key
Resets the system to factory defaults.
⑩
Security Slot
Allows you to connect a universal security cable to VC800
codec, so you can lock it down. The system cannot be
removed when locked.
VCH50 Video Conferencing Hub
The left side of cable hub:
Port Name
Description
①
Codec
Connects to the VC800 codec using a 7.5m Ethernet cable.