Yealink VC800 - Presentation

User Guide for the VC800 Video Conferencing System
116
- If is set to Input key, press .
For more information on how to customize the key, refer to Custom Key Type on
page 61.
- Press or to open Talk Menu.
Press or to scroll to Other and then press to expand the menu.
Press or to scroll to Input and then press to enter submenu.
The display device shows Camera, Camera +PC and PC input sources.
2. Press or to select the desired input source , and then press .
- If you select PC, the remote video image is shown in big size, and the PC content is
shown in small size.
- If you select Camera+PC, the PC content is shown in big size, and other video images
are shown in small size.
- If you select Camera, the layout is shown in the PIP (Picture-in-Picture).
3. Press to return.
Video input is configurable via web user interface at the path Home->Input.
Presentation
The system supports sharing video and documents on a PC while simultaneously displaying the
main video. We recommend using dual display devices for sharing contents.
During a call, if a PC is connected to the VCH50 video conferencing hub, the VC800 system will
start presentation automatically. You can also start/stop presentation manually during a call via
the remote control or CP960 conference phone. The presentation stops automatically if the PC is
disconnected from the system.