Yealink VC800 - Ending Calls

User Guide for the VC800 Video Conferencing System
112
Ending Calls
During a two-way call, do one of the following to end the call.
- Press on the remote control.
- Tap EndCall on the CP960 conference phone.
- Click Hang Up All button on the web user interface.
The interface prompts “Hang up?”
Click Confirm to end the call.
During a multi-way call, do one of the following to end the call.
- Press on the remote control.
The display device prompts “End all active calls?”
Select OK, and then press .
- Tap EndCall on the CP960 conference phone.
The CP960’s touch screen prompts “End all active calls?”
Tap OK to end all calls.
- Click Hang Up All button on the web user interface.
The interface prompts “Hang up?”
Click Confirm to end the call.
During a multi-way call, you can remove any party via the remote control, CP960 conference
phone or web user interface.
To remove any party via the remote control:
1. Press or to open Talk Menu.
2. Press or to scroll to Remove and then press to enter submenu.