Yealink VC800 - Call Management; Call Mute

Using the VC800 Video Conferencing System
113
3. Select the party you want to remove, and then press .
To remove any party via the CP960 conference phone:
1. Tap -> .
2. Tap after the desired party to remove.
To remove any party from a multi-way call via web user interface, go to the path Home (Hover
your cursor over of the number of remote system, and then click ).
Call Management
You can enable mute mode, record video, control the video and change video layout during an
active call.
Call Mute
You can enable mute mode to mute the microphone of the active audio device during an active
call, and then the other party cannot hear you.
To mute a call during a call:
Do one of the following:
- Press on the remote control.
- Tap on the CP960 conference phone to mute the call.
- Tap on the CP960’s touch screen to mute the call.
- Tap on the CPW90 wireless expansion mic to mute the call.