Yealink VC800 - Customizing the VC800 Video Conferencing System; General Settings

Customizing the VC800 Video Conferencing System
45
Customizing the VC800 Video Conferencing
System
You can customize your VC800 video conferencing system by personally configuring certain
settings, for example, site name, time & date and language. You can add contacts to the local
directory manually or from the call history.
This chapter provides basic operating instructions for customizing your system. Topics include:
 General Settings
 Directory
 Call History Management
 Call Protocol
 Bandwidth Settings
 Audio Setting
 Far Control Near Camera
If you require additional information or assistance with your new system, contact your system
administrator.
General Settings
Automatic Sleep Time
The system will go to sleep automatically when it has been inactive for a period of time (the
default period is 10 minutes).When the system is in sleep mode, it can still accept incoming calls.
The display device will prompt “No Signal“.
You can change the automatic sleep time via the remote control or web user interface.
To configure the automatic sleep time via the remote control:
1. Select (More menu).
2. Press or to scroll to Setting and then press to expand the menu.
3. Press or to scroll to Basic and then press to enter submenu.
4. Press or to scroll to Automatic Sleep Time and then press .
5. Select desired time.