User Guide for the VC800 Video Conferencing System
62
To configure a custom key type via web user interface:
1. Click on Setting->Remote Control.
2. Select the desired value from the pull-down list of Custom Key Type.
- Input: press to select the video input source.
- Screencapture: press to capture screen.
- Mute Speaker: press to mute or unmute the speaker.
- Presentation: press to start or stop presentation.
3. Click Confirm to accept the change.
USB Configuration
If you have high requirement for data security, you can disable the USB feature. If you disable
the USB feature, you cannot view the videos and screenshots stored in the USB flash driver via
the remote control, and cannot record video or capture screenshot.
To configure USB configuration via web user interface:
1. Click on Setting->Video & Audio.
To Next Page
Loading...
