Using the VC800 Video Conferencing System
119
remote control) at most.
To move the local camera to a preset position via web user interface:
1. Click Home.
2. Hover your cursor over yourself on the left side of the screen, and then click .
3. Click a number to move local camera to this stored preset.
You can move local camera to 12 preset positions (corresponding to 0 to 12 key on the
web user interface).
Updating the Stored Preset
You can update the stored presets to see the current preview screens. It helps you decide where
you want your camera to move.
To update the stored preset during a video call:
1. Press or to open Talk Menu.
2. Press or to scroll to Other and then press to expand the menu.
3. Press or to scroll to Preset and then press to enter submenu.
4. Select Update Preset, and then press .
All preview screens will be updated.
Editing the Stored Preset
You can edit the stored presets to adjust camera angle and focus.
To edit the stored preset during a video call:
1. Press or to open Talk Menu.
2. Press or to scroll to Other and then press to expand the menu.
3. Press or to scroll to Preset and then press to enter submenu.
To Next Page
Loading...
