Customizing the VC800 Video Conferencing System
65
The default contact bandwidth is Auto. The system will select the appropriate bandwidth
automatically.
9. Press or to select Save and then press to accept the change.
To add a conference contact via the remote control:
1. Select (Dial menu) or press to enter the pre-dialing screen.
2. Press to return to the menu.
3. Press or to scroll to Directory and then press to enter submenu.
4. Press or to scroll to All Contacts and then press to select Conference
Contacts from the pull-down list.
5. Press or to scroll to New Conference, and then press .
6. Enter conference name in the Name field.
7. Enter a few characters of the contact name or the contact number in the Search field.
Contacts whose name or number matches the characters entered will appear on the
screen.
8. Press or to select the desired local contact, and then press to add the desired
local contacts to the members List.
9. Repeat steps 7 to 8 to add more contacts.
To Next Page
Loading...
