7-36
IM AQ1210-01EN
Connecting the Fiber Inspection Probe
3.
Connect the fiber inspection probe to the USB port (Type A) of this instrument.
4.
Connect the probe of the fiber inspection probe to the end face of the optical fiber cable.
Note
For instructions on how to use the fiber inspection probe, see the user’s manual for the probe.
Soft Key Menu (fiber inspection probe)
5.
Tap the soft key menu display button. A soft key menu for the fiber inspection probe appears.
Fiber Inspection Probe Menu
Displays the image in real time
Holds the image display (HOLD)
Starts saving
Press this soft key to save the still image to a BMP file. For the procedure
to set the file save destination and file name, see section 9.4.
Executes pass/fail judgment
A pass/fail judgment is performed, and the result (summary) is displayed.
Displays results
Displays the judgment results (detail)
7.6 Using the Fiber Inspection Probe (/FST option)
To Next Page
Loading...
