YOKOGAWA DLM4038 - Page 52

5-19
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
Command Function Page
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:ALL
Collectively turns on or off all measurement items of a logic waveform in the
specified area.
5-143
:MEASure:{PODA<x>
|PODB<x>|PODL<x>}
{[:AREA1]|:AREA2}:<Parameter>?
Queries the setting of a logic waveform parameter in the specified area. 5-143
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:<Paramete
r>:COUNt?
Queries the statistical processing count of a logic waveform parameter in the
specified area.
5-143
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:<Paramete
r>:{MAXimum|MEAN|MINimum|SDEVia
tion}?
Queries a statistical value of a logic waveform parameter in the specified
area.
5-144
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:<Paramete
r>:STATe
Sets or queries the on/off status of a logic waveform parameter in the
specified area.
5-144
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:<Paramete
r>:VALue?
Queries an automatically measured value of a logic waveform parameter in
the specified area.
5-144
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:COPY
Copies the on/off status of all measurement items of a logic waveform to all
other waveforms in the specified area.
5-144
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:DELay?
Queries all of the settings for measuring the delay between channels of a
logic waveform in the specified area.
5-144
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:DELay:MEA
Sure?
Queries all of the settings for measuring the delay between channels of a
logic waveform in the specified area.
5-145
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:DELay:MEA
Sure:COUNt
Sets or queries the count number of a source waveform for measuring the
delay between channels of a logic waveform in the specified area.
5-145
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:DELay:MEA
Sure:SLOPe
Sets or queries the slope of a source waveform for measuring the delay
between channels of a logic waveform in the specified area.
5-145
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:DELay:REF
erence?
Queries all reference waveform settings used to measure the delay between
the specified logic waveform and the reference waveform in the specified
area.
5-145
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:DELay:REF
erence:COUNt
Sets or queries the count number of a reference waveform for measuring the
delay between channels of a logic waveform in the specified area.
5-145
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:DELay:REF
erence:SLOPe
Sets or queries the slope of the reference waveform used to measure the
delay between the specified logic waveform and the reference waveform in
the specified area.
5-145
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:DELay:REF
erence:SOURce
Sets or queries whether the reference point for measuring the delay between
channels of a logic waveform will be set to the trigger point or a waveform in
the specified area.
5-145
:MEASure:{PODA<x>|PODB<x>|PODL
<x>}{[:AREA1]|:AREA2}:DELay:REF
erence:TRACe
Sets or queries the reference waveform edge used to measure the delay
between the specified logic waveform and the reference waveform in the
specified area.
5-146
:MEASure:RANGe<x>
Sets or queries the measurement source window. 5-146
:MEASure:TRANge<x> (Time Range)
Sets or queries a time range. 5-146
:MEASure:USER<x>?
Queries all automatic measurement settings for a Calc item. 5-146
:MEASure:USER<x>:COUNt?
Queries the statistical processing count of the automatically measured value
of a Calc item.
5-146
:MEASure:USER<x>:DEFine
Sets or queries the expression for the automatically measured value of a
Calc item.
5-146
:MEASure:USER<x>:{MAXimum|MEAN|
MINimum|SDEViation}?
Queries a statistical value that is calculated on the automatically measured
value of a Calc item.
5-146
:MEASure:USER<x>:NAME
Sets or queries the name of a Calc item. 5-146
:MEASure:USER<x>:STATe
Sets or queries the on/off status of automated measurement of a Calc item. 5-147
:MEASure:USER<x>:UNIT
Sets or queries the unit of a Calc item. 5-147
:MEASure:USER<x>:VALue?
Queries the automatically measured value of a Calc item. 5-147
:MEASure:WAIT?
Waits for the completion of waveform parameter automated measurement
with a set timeout.
5-147
5.1 List of Commands