5-21
IM DLM4038-17EN
Commands
5
Command Function Page
:SEARch:SELect
Sets which detected point to display in the zoom window and queries the
zoom position of the detected point.
5-153
:SEARch:SELect? MAXimum
Queries the number of detected points. 5-153
:SEARch:SKIP?
Queries all skip mode settings. 5-153
:SEARch:SKIP:DECimation
Sets or queries the number of detected points that will be skipped in skip
mode.
5-153
:SEARch:SKIP:HOLDoff
Sets or queries how long searching will be skipped. 5-154
:SEARch:SKIP:MODE
Sets or queries the skip mode. 5-154
:SEARch:SPOint
Sets or queries search start point. 5-154
:SEARch:TWINdow
Sets or queries which window will display the detected points. 5-154
:SEARch:TYPE
Sets or queries search type. 5-154
:SEARch:WIDTh?
Queries all pulse width search settings. 5-154
:SEARch:WIDTh:HYSTeresis
Sets or queries the pulse width search level hysteresis. 5-154
:SEARch:WIDTh:LEVel
Sets or queries the pulse width search level. 5-154
:SEARch:WIDTh:POLarity
Sets or queries the pulse width search level polarity. 5-154
:SEARch:WIDTh:SOURce
Sets or queries the pulse width search source waveform. 5-154
:SEARch:WIDTh:TIME<x>
Sets or queries the pulse width for pulse width searching. 5-154
:SEARch:WIDTh:TYPE
Sets or queries the pulse width search type. 5-155
SERialbus Group
:SERialbus<x>?
Queries all serial bus signal analysis and search settings. 5-156
:SERialbus<x>:ASETup:ABORt
Aborts auto setup on a serial bus signal. 5-156
:SERialbus<x>:ASETup:EXECute
Executes auto setup on a serial bus signal. 5-156
:SERialbus<x>:CAN?
Queries all CAN bus signal settings. 5-156
:SERialbus<x>:CAN:ANALyze?
Queries all CAN bus signal analysis settings. 5-156
:SERialbus<x>:CAN[:ANALyze]:SET
up?
Queries all CAN bus signal analysis bus settings. 5-156
:SERialbus<x>:CAN[:ANALyze]:SET
up:BRATe
Sets or queries the CAN bus signal analysis bit rate (data transfer rate). 5-156
:SERialbus<x>:CAN[:ANALyze]:SET
up:RECessive
Sets or queries the CAN bus signal analysis recessive level. 5-156
:SERialbus<x>:CAN[:ANALyze]:SET
up:SOURce
Sets or queries the CAN bus signal analysis source. 5-157
:SERialbus<x>:CAN[:ANALyze]:SET
up:SPOint
Sets or queries the CAN bus signal analysis sample point. 5-157
:SERialbus<x>:CAN:DETail?
Queries all CAN bus signal analysis result list settings. 5-157
:SERialbus<x>:CAN:DETail:DISPl
ay
Sets or queries the display mode for the CAN bus signal analysis result list. 5-157
:SERialbus<x>:CAN:DETail:LIST:I
TEM?
Queries all items that will be displayed in the CAN bus signal analysis result
list.
5-157
:SERialbus<x>:CAN:DETail:LIST:V
ALue?
Queries all of the data for the specified analysis number in the CAN bus
signal analysis result list.
5-157
:SERialbus<x>:CAN:SEARch?
Queries all CAN bus signal search settings. 5-157
:SERialbus<x>:CAN:SEARch:ABORt
Aborts the CAN bus signal search. 5-157
:SERialbus<x>:CAN:SEARch:EXECu
te
Executes a CAN bus signal search. 5-157
:SERialbus<x>:CAN:SEARch:FJUMp:
ACK
Jumps to the ACK Field in the CAN bus signal search result. 5-157
:SERialbus<x>:CAN:SEARch:FJUMp:
CONTrol
Jumps to the Control Field in the CAN bus signal search result. 5-157
:SERialbus<x>:CAN:SEARch:FJUMp:
CRC
Jumps to the CRC Field in the CAN bus signal search result. 5-158
:SERialbus<x>:CAN:SEARch:FJUMp:
DATA
Jumps to the Data Field in the CAN bus signal search result. 5-158
:SERialbus<x>:CAN:SEARch:FJUMp:
IDENtifier
Jumps to the Identifier in the CAN bus signal search result. 5-158
:SERialbus<x>:CAN:SEARch:FJUMp:
SOF
Jumps to the SOF in the CAN bus signal search result. 5-158
:SERialbus<x>:CAN:SEARch:SELect
Sets which detected point to display in the CAN bus signal search zoom
window and queries the zoom position of the detected point.
5-158
:SERialbus<x>:CAN:SEARch:SELect?
MAXimum
Queries the number of detected points in the CAN bus signal search. 5-158
5.1 List of Commands
To Next Page
Loading...
