YOKOGAWA DLM4038 - Page 55

5-22
IM DLM4038-17EN
Command Function Page
:SERialbus<x>:CAN:SEARch:SETup?
Queries all CAN bus signal search condition settings. 5-158
:SERialbus<x>:CAN:SEARch:SETup:
EFRame?
Queries all CAN bus signal search error settings. 5-158
:SERialbus<x>:CAN:SEARch:SETup:
EFRame[:MODE]
Sets or queries the CAN bus signal search error frame setting. 5-158
:SERialbus<x>:CAN:SEARch:SETup:
EFRame:CRC
Sets or queries the CAN bus signal search CRC error setting. 5-159
:SERialbus<x>:CAN:SEARch:SETup:
EFRame:STUFF
Sets or queries the CAN bus signal search stuff error setting. 5-159
:SERialbus<x>:CAN:SEARch:SETup:
IDData?
Queries all ID and data condition settings for CAN bus signal searching. 5-159
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:ACK?
Queries all ACK settings for the ID and data conditions for CAN bus signal
searching.
5-159
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:ACK:MODE
Sets or queries the ACK mode, which is one of the ID and data conditions,
for CAN bus signal searching.
5-159
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:ACK:TYPE
Sets or queries the ACK condition, which is one of the ID and data
conditions, for CAN bus signal searching.
5-159
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA?
Queries all data settings for the ID and data conditions for CAN bus signal
searching.
5-159
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA:CONDition
Sets or queries the comparison condition, which is one of the ID and data
conditions, for CAN bus signal searching.
5-160
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA:DECimal<y>
Sets a reference value, which is one of the ID and data conditions, for CAN
bus signal searching in decimal notation.
5-160
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA:DLC
Sets or queries the data length code (DLC), which is one of the ID and data
conditions, for CAN bus signal searching.
5-160
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA:ENDian
Sets or queries the byte order of the reference values, which is one of the ID
and data conditions, for CAN bus signal searching.
5-160
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA:HEXa<y>
Sets a reference value, which is one of the ID and data conditions, for CAN
bus signal searching in hexadecimal notation.
5-160
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA:MODE
Sets or queries the data enable/disable condition, which is one of the ID and
data conditions, for CAN bus signal searching.
5-160
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA:MSBLsb
Sets or queries the MSB and LSB bits for the data, which is one of the ID
and data conditions, for CAN bus signal searching.
5-161
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA:PATTern<y>
Sets or queries the data value, which is one of the ID and data conditions, for
CAN bus signal searching in binary notation.
5-161
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA:PFORmat
Sets or queries the data input format, which is one of the ID and data
conditions, for CAN bus signal searching.
5-161
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:DATA:SIGN
Sets or queries whether signed or unsigned data format will be used, which
is one of the ID and data conditions, for CAN bus signal searching.
5-161
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:IDENtifier?
Queries all identifier settings for the ID and data conditions for CAN bus
signal searching.
5-161
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:IDENtifier:HEXa
Sets the ID value, which is one of the ID and data conditions, for CAN bus
signal searching in hexadecimal notation.
5-161
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:IDENtifier:MFORmat
Sets or queries the ID frame format (standard or extended), which is one of
the ID and data conditions, for CAN bus signal searching.
5-161
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:IDENtifier:MODE
Sets or queries the ID enable/disable condition, which is one of the ID and
data conditions, for CAN bus signal searching.
5-162
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:IDENtifier:PATTern
Sets or queries the ID pattern, which is one of the ID and data conditions, for
CAN bus signal searching in binary notation.
5-162
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:IDENtifier:PFORmat
Sets or queries the ID input format, which is one of the ID and data
conditions, for CAN bus signal searching.
5-162
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:MSIGnal?
Queries all message and signal settings for the ID and data conditions for
CAN bus signal searching.
5-162
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:MSIGnal:MESSage:ITEM
Sets the message item, which is one of the ID and data conditions, for CAN
bus signal searching.
5-162
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:MSIGnal:SELect
Sets or queries the message and signal condition, which is one of the ID and
data conditions, for CAN bus signal searching.
5-162
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:MSIGnal:SIGNal?
Queries all signal settings for the ID and data conditions for CAN bus signal
searching.
5-162
:SERialbus<x>:CAN:SEARch:SETup[
:IDData]:MSIGnal:SIGNal:CONDiti
on
Sets or queries the signal data condition, which is one of the ID and data
conditions, for CAN bus signal searching.
5-163
5.1 List of Commands