<9. Advanced Engineering >
• _MVTRK_ACT_SW (Output tracking SW) Default: OFF
• _AUT_FLBK_SW (AUT fallback switch) Default: OFF
To enable I/O compensation, gap, deadband, output tracking or AUT fallback
function, modify the respective switch to ON.
• _ANS_IN_SW (Answerback input action direction switch) Default:
Forward
• _ANS_CHK_SW (Answerback check monitoring action switch) Default:
both sides
• _ANS_TRK_SW (Answerback tracking action switch) Default: ON
• _SIO_OUT_DIR_SW (Output signal conversion action direction switch)
Default: Forward
These engineering parameters are related to switch instrument POUs
(NPAS_SIO_**). Modify these parameter values as required.
To Next Page
Loading...
Need help?
General
