YOKOGAWA STARDOM FCN-RTU User Manual

<4. Control Application Creation>
32
TI 34P02K35-02E
Jun. 6, 2018-00
Execution triggers (status change or error) for a system tasks can be selected
from a list of predefined triggers.
System tasks are run only under specific FCN-500 or FCN-RTU conditions.
Hence, this task type is, in general, not used in control applications except for
some special-purpose applications.
IMPORTANT
As default and system task types are, in general, not used in control applications,
the description hereafter is limited to the cyclic task type.
Moreover, the term "control task" hereafter shall refers to a cyclic control task.

YOKOGAWA STARDOM FCN-RTU Specifications

General

Brand	YOKOGAWA
Model	STARDOM FCN-RTU
Category	Controller
Language	English