11-8
IM WT3001E-51EN
• Selecting the FFT Source
3.
Press the FFT1 Object or FFT2 Object soft key to display the FFT source
selection box.
4.
Press the cursor keys to select the FFT source.
5.
Press the SET key to confirm.
• Setting the Label
6.
Press the FFT1 Label or FFT2 Label soft key to display the keyboard.
7.
Use the keyboard to set the label.
For keyboard operations, see section 3.14 in the User’s Manual IM WT3001E-01EN.
11.4 Selecting the Power Spectrum to Be Displayed, Selecting the FFT Source, and Setting the Label
To Next Page
Loading...
