8-3
IM WT3001E-51EN
Wide Bandwidth Harmonic Measurement (Option)
8
8.3 Selecting the Wide Bandwidth Harmonic
Measurement Mode and Displaying Numeric
Data
Procedure
START STOP
REMOTE
CAL
SENSOR RATIO
MEASURING
RMS MEAN DC RMEAN
CURRENT RANGE VOLTAGE RANGE
MEASURING
RMS MEAN DC RMEAN
ALL
INPUT INFO.
LOWER ITEM LOWER FORM ALL USER SET
DISPLAY
ITEM & ELEMENT
2
3 4
COMPEN
ELEMENT
ELEMENT
1
WIRING
MODE AUTO MODE
AUTO
EXT SENSOR
NUMERIC
WAVE
OTHERS
ITEM
FORM
U / I / P
WP/q/
TIME
USER
ELEMENT
UPDATE
RATE
HOLD
SINGLE
INTEG
LOCAL
SHIFT
RESET SET
PAGE PAGE
Cursor keys
To exit the menu during
operation, press ESC located
above the soft keys.
In the procedural explanation
below, the phrase “press the
cursor keys” may be used.
This phrase refers to the
procedures for selecting
items and entering values
and character strings. For
details on the procedures,
see section 3.14 in the
Manual, IM WT3001E-01EN.
• Displaying Numeric Data
1.
Press NUMERIC to display numeric values.
• Displaying Numeric Data on the Split Screen
1.
Press OTHERS to display the Others menu.
2.
Press the Numeric+Bar soft key to select the display mode.