2-12
IM WT3001E-51EN
2.5 Auto Print
Procedure
START STOP
REMOTE
CAL
MOTOR
SET
CURSOR NULL
MENU STORE SET
MENU
LOWER ITEM LOWER FORM ALL USER SET
RESET SET
PAGE PAGE
SCALING
HRM SET
MEASURE
SYNC SOURCE
AVG
LINE FILTER
FREQ
FILTER
FILE
PRINT
MISC
STORE
IMAGE SAVE
HELP
NUMERIC
WAVE
OTHERS
ITEM
FORM
U / I / P
WP/q/
TIME
USER
ELEMENT
UPDATE
RATE
HOLD
SINGLE
INTEG
LOCAL
SHIFT
Cursor keys
To exit the menu during operation, press ESC located above the
soft keys.
In the procedural explanation below, the phrase “press the cursor
keys” may be used. This phrase refers to the procedures for
selecting items and entering values and character strings. For
details on the procedures, see section 3.14 in the User’s Manual,
IM WT3001E-01EN.
1.
Press SHIFT+PRINT (MENU) to display the Print menu.
• Setting the Print Destination, Output Format, Etc.
2.
Set the print destination to the built-in printer, and set the output format according
to the Procedures given in sections 2.3 and 2.4.
• Selecting the Synchronization Mode
3.
Press the Auto Print Setting soft key to display the Auto Print Setting menu.
4.
Press the cursor keys to select Synchronize.
5.
Press SET to select Timer or Integrate.
If you select Timer, proceed to step 6 in “Print Timer Synchronized Auto Print” on
the next page.
If you selected Integrate, proceed to step 6 in “Integration Synchronized Auto
Print” on page 2-14.
To Next Page
Loading...
