YOKOGAWA WT3002E User Manual

5-25
IM WT3001E-51EN
Ethernet Communications (Option)
1
2
3
4
5
6
7
8
9
10
11
12
13
Index
5.8 Checking the Ethernet Communication Function
(Option) Availability and MAC Address
Procedure
START STOP
REMOTE
CAL
MOTOR
SET
CURSOR NULL
MENU STORE SET
MENU
LOWER ITEM LOWER FORM ALL USER SET
DISPLAY ITEM & ELEMENT
RESET SET
PAGE PAGE
SCALING
HRM SET MEASURE SYNC SOURCE
AVG LINE FILTER
FREQ
FILTER
FILE
PRINT
MISC
STORE IMAGE SAVE
HELP
NUMERIC
WAVE
OTHERS
ITEM
FORM
U / I / P
WP/q/
TIME
USER
ELEMENT
UPDATE
RATE
HOLD
SINGLE
INTEG
LOCAL
SHIFT
Cursor keys
To exit the menu during operation, press ESC located above the
soft keys.
In the procedural explanation below, the phrase “press the cursor
keys” may be used. This phrase refers to the procedures for
selecting items and entering values and character strings. For
details on the procedures, see section 3.14 in the User’s Manual,
IM WT3001E-01EN.
1.
Press MISC to display the Misc menu.
2.
Press the System Overview soft key to display the System Overview window.
The availability of the Ethernet communication function (option) and the MAC address
information are displayed in the System Overview window.
Explanation
• Availability of the Ethernet Communication Function (Option)
The availability is displayed under Ethernet in the System Overview window.
• If Yes is displayed, the Ethernet communication function is available.
• If No is displayed, the Ethernet communication function is not available.
• MAC Address
The MAC address is a unique address that is pre-assigned to this instrument. The
MAC address is displayed under Mac Address in the System Overview window.
Note
The MAC address is displayed only on products with the Ethernet communication function. If
the MAC address is displayed as “xxxxxx_xxx_xxx” even though the Ethernet communication
function is installed, contact your nearest YOKOGAWA dealer.

YOKOGAWA WT3002E Specifications

General

Brand	YOKOGAWA
Model	WT3002E
Category	Measuring Instruments
Language	English