YOKOGAWA WT3002E - Page 216

12-15
IM WT3001E-51EN
Voltage Fluctuation and Flicker Measurement (Option)
1
2
3
4
5
6
7
8
9
10
11
12
13
Index
• Setting the Limit on Period during Which Relative Voltage Change Exceeds
the Threshold Level Tmax
(Valid when ON (judge) is selected in step 16)
17.
Press the cursor keys to select the left Limit box (ms) by Tmax.
18.
Press SET to display the entry box.
19.
Press the cursor keys to set the limit.
20.
Press SET or ESC to close the box.
• Setting the Threshold Level
(Valid when ON (judge) is selected in step 16)
21.
Press the cursor keys to select the right Limit box (ms) by Tmax.
22.
Press SET to display the entry box.
23.
Press the cursor keys to set the threshold level.
24.
Press SET or ESC to close the box.
• Setting the Judgement Conditions for Short-Term Flicker Value Pst
• Turning ON/OFF the Judgement of Short-Term Flicker Value Pst
25.
Press the cursor keys to select Judgement by Pst.
26.
Press SET to select ON (judge) or OFF (not judge).
• Setting the Limit on Short-Term Flicker Value Pst
(Valid when ON (judge) is selected in step 26)
27.
Press the cursor keys to select Limit by Pst.
28.
Press SET to display the entry box.
29.
Press the cursor keys to set the limit.
30.
Press SET or ESC to close the box.
• Setting the Judgement Conditions for Long-Term Flicker Value Plt
• Turning ON/OFF the Judgement of Long-Term Flicker Value Plt
31.
Press the cursor keys to select Judgement by Plt.
32.
Press SET to select ON (judge) or OFF (not judge).
12.4 Setting the Judgement Conditions