12-29
IM WT3001E-51EN
Voltage Fluctuation and Flicker Measurement (Option)
12
• Resetting the Measurement of dmax Caused by Manual Switching
29.
Press the Reset soft key. An Alert dialog box appears.
30.
Press the cursor keys to select OK.
31.
Press SET. The measurement of dmax caused by manual switching is reset.
The measured data and judgement up to that point are discarded. The flicker
measurement status indicates Reset. To not reset, select Cancel in step 30 and
press SET.
12.6 Executing the Measurement of dmax Caused by Manual Switching
To Next Page
Loading...
