13-16
IM WT3001E-51EN
• Page Scrolling the Screen (Cursor Keys)
19.
Press ESC to clear the soft key menu at the right of the screen.
20.
Press the cursor keys (up and down keys) to move the highlight.
• If you press the down cursor key when the highlight is at the bottom row, the next page is
displayed.
• If you press the up cursor key when the highlight is at the top row, the previous page is
displayed.
• Jumping Pages
21.
Press ITEM to display the CBC Items menu.
22.
Press the Cursor No. soft key.
23.
Press the cursor keys to set the cycle number. The page containing the cycle
number is displayed.
• Jumping to the Last or First Page
24.
Press SHIFT+PAGE
(
)
or SHIFT+PAGE
(
)
.
• Press SHIFT+PAGE ( ) to display the last page.
• Press SHIFT+PAGE ( ) to display the first page.
• Resetting the Cycle-by-Cycle Measurement
25.
Press FORM to display the CBC Form menu.
26.
Press the Reset soft key. An Alert dialog box appears.
27.
Press the cursor keys to select OK.
28.
Press SET. The cycle-by-cycle measurement is reset. The measured data and
judgement results up to that point are discarded. The cycle-by-cycle measurement
status indicates Reset. To not reset, select Cancel in step 27 and press SET.
13.4 Executing the Cycle-by-Cycle Measurement
To Next Page
Loading...
