YOKOGAWA WT3002E User Manual

5-10
IM WT3001E-51EN
• Specifying the Save Destination FTP Server
5.
Press the cursor keys to select FTP Server.
6.
Press SET. A keyboard appears.
7.
Use the keyboard to enter the IP address of the FTP server. If you are using
DNS, you can specify the server by name.
For keyboard operations, see section 3.14 in the User’s Manual IM WT3001E-01EN.
• Entering the Login Name and Password for Accessing the Save
Destination FTP Server
8.
Press the cursor keys to select Login Name.
9.
Press SET. A keyboard appears.
10.
Use the keyboard to enter the login name.
For keyboard operations, see section 3.14 in the User’s Manual IM WT3001E-01EN.
11.
Press the cursor keys to select Password.
12.
Press SET. A keyboard appears.
13.
Use the keyboard to enter the password. A password is not required if the login
name is anonymous.
For keyboard operations, see section 3.14 in the User’s Manual IM WT3001E-01EN.
• Setting the Timeout Value
14.
Press the cursor keys to select Time Out.
15.
Press SET. The timeout value entry box appears.
16.
Press the cursor keys to set the timeout value.
17.
Press SET or ESC to close the box.
• Connecting to/Disconnecting from the Save Destination FTP Server
18.
Press the cursor keys to select Connect or Disconnect.
19.
Press SET.
• If you select Connect and press SELECT, a connection is established to the save
destination FTP server. When the connection is made, is displayed in the upper left
corner of the screen.
• If you select Disconnect and press SELECT, connection to the save destination FTP
server is dropped. The displayed in the upper left corner of the screen disappears.
• Saving the Data
• To save the setup parameters, waveform display data, or numeric data, carry out
the save operation according to the procedure given in section 9.3 in the User’s
Manual IM WT3001E-01EN.
• To save the screen image data, carry out the save operation according to the
procedure given in section 9.4 in the User’s Manual IM WT3001E-01EN.
• For the procedure “Selecting the Save Destination Medium” in section 9.3 in the
User’s Manual IM WT3001E-01EN, set the storage medium to NetWork.
5.3 Saving Setup, Waveform Display, Numeric, and Image Data to the FTP Server (FTP Client Function)

YOKOGAWA WT3002E Specifications

General

Brand	YOKOGAWA
Model	WT3002E
Category	Measuring Instruments
Language	English