YOKOGAWA WT3002E - Page 82

5-13
IM WT3001E-51EN
Ethernet Communications (Option)
1
2
3
4
5
6
7
8
9
10
11
12
13
Index
• Specifying the Printer Server
5.
Press the cursor keys to select LPR Server.
6.
Press SET. A keyboard appears.
7.
Use the keyboard to enter the IP address of the printer server. If you are using
DNS, you can specify the server by name.
For keyboard operations, see section 3.14 in the User’s Manual IM WT3001E-01EN.
• Entering the Printer Name
8.
Press the cursor keys to select LPR Name.
9.
Press SET. A keyboard appears.
10.
Use the keyboard to set the printer name.
For keyboard operations, see section 3.14 in the User’s Manual IM WT3001E-01EN.
• Setting the Output Destination to a Network Printer
1.
Press SHIFT+PRINT (MENU) to display the Print menu.
2.
Press the Print to soft key to display the Print to menu.
3.
Press the Net Print soft key.
• Selecting the Output Command
4.
Press the Format soft key to display the Format menu.
5.
Press any soft key from BJ to LIPS3 to select the output command.
If you selected BJ, proceed to step 6.
If you selected PCL5, proceed to step 8 on the next page.
If you selected LIPS3, proceed to step 9 on the next page.
5.4 Printing Screen Images on a Network Printer