5-22
IM WT3001E-51EN
Note
• This instrument supports only a single client.
• When this instrument is accessed from the PC or workstation (login), is displayed in the
upper left corner of the screen.
• The FTP server function cannot be used under the following cases.
• When this instrument is accessing a PC or workstation on the network (FTP client
function, see section 5.3).
• When this instrument is outputting to a network printer (LPR client function, see section
5.3).
• When this instrument is performing file operations (see chapter 9 in the User’s Manual
IM WT3001E-01EN).
• The PC card, USB storage, and network drive are displayed as [PC_Card], [USB], and [ND0],
respectively, at the root directory of the PC or workstation accessing this instrument.
• The log list is cleared when the power is turned OFF.
• When using the FTP server function, set the TCP/IP parameters according to section 5.2,
“Setting the Ethernet Interface (TCP/IP).”
• To apply new settings, this instrument must be power cycled.
5.6 Accessing this instrument from a PC or Workstation (FTP Server Function)
To Next Page
Loading...
