Getting Started
11
2. The external power has two parts: the part that plugs into the power source and the adapter with a cord that
plugs into your tablet. Join the two parts by plugging the power cord into the adapter to form one long cord.
3. To connect external power to the tablet, open the port door to expose the power adapter port. Plug the AC
adapter into this port on your tablet.
4. Plug the power cord into an outlet.
The battery charging indicator on the front of the L10 tablet blinks amber to indicate that the battery is
charging. It is solid green when fully charged
5. Press and release the oval Power button in the center of the right side of the tablet to turn it on.
6. Keep the tablet on AC power until the battery is fully charged. However, you don’t have to wait until the tablet is
fully charged to turn it on. The L10 will charge while you use it.
Optional Setup Tasks
Backing Up Files and Creating a Recovery Drive
After setting up the L10 the way you like it and installing applications, create a recovery drive on an external USB
drive. A recovery drive lets you start your tablet and access recovery and troubleshooting tools if you encounter
any issues with your Windows installation.
For more information, see Backing Up Your Files on page 39 and Restoring Your System on page 40 .
Attaching the Pen Tether
The pen comes with a tether so that you can attach it to your tablet to avoid misplacing it.
1. Slip one end of the tether through the hole at the end of the pen, and pull the pen through the loop until it is
tight.
2. Slip the other end of the tether through the attach point on the tablet, then pull the pen through the loop until it
is tight.
Insert Photo
Power adapter port
Power button
To Next Page
Loading...
Need help?
General
