Zebra MC93 Series Integrator Guide

Accessories
30
Cables
USB Charge/Com Snap-On Cup
NOTE: A separate USB cable and pow-
er supply is required to support fast
charging. USB (Type-C) Cable is re-
quired to allow communication from the
snap-on to the PC/laptop.
CBL-MC93-USBCHG-01 Provides power and/or communication over
USB to the device. Requires wall
adapter/power supply
PWR-WUA5V12W0xx.
1-Slot Cradle USB Cable CBL-TC2X-USBC-01 or
CBL-TC5X-USBC2A-01
Provides USB communication through the
1-Slot USB cradle to the host computer.
Miscellaneous
Cradle Adapter ADP-MC93-CRDCUP-01 MC93XX Charge Only Adapter for
backwards compatibility with MC9XX
cradles. Works with MC9XX 1-Slot USB
Cradle, and 4-Slot Charge Only Cradle.
7000 mAh PowerPrecision+
standard battery
BTRY-MC93-STN-01
BTRY-MC93-STN-10
BTRY-MC93-STN-IN
Replacement standard capacity battery.
Replacement standard capacity battery (10–
pack).
Replacement standard capacity battery
(India).
MC93XX Hand Strap SG-MC93-HDSTPG-01 Replacement hand strap for the MC93XX
Hand strap loop holds an optional stylus
(SG-TC7X-STYLUS-03).
MC93 Soft Holster for Gun SG-MC9X-SHLSTG-01 Provides a soft, clip on holster and a
shoulder strap for the MC93XX.
MC93 Rubber Boot for Gun SG-MC93-RBTG-01 Provides additional protection for wear and
tear of the MC93XX.
Screen Protector MISC-MC93-SCRN-01 Provides additional protection for display
(5-pack).
Stylus and Tether SG-TC7X-STYLUS-03 Conductive carbon-filled stylus for capacitive
touch panel; includes coiled tether (3-pack).
Table 4 MC93XX Accessories (Continued)
Accessory Part Number Description

Zebra MC93 Series Specifications

General

Brand	Zebra
Model	MC93 Series
Category	PDA
Language	English