Zebra MC93 Series Integrator Guide

Accessories
50
Rubber Boot
The rubber boot provides additional protection to the device.
To attach the rubber boot:
1. Slide the top of the device into the top of the rubber boot.
Figure 39 Attach top of Rubber Boot
2. Grasp the bottom of the rubber boot and place over the bottom of the device.
Figure 40 Attach bottom of Rubber Boot
NOTE: To function properly, remove the lower part of the rubber boot or the entire rubber boot before placing in a
charging cradle.

Zebra MC93 Series Specifications

General

Operating Temperature	-4°F to 122°F/-20°C to 50°C
Processor	Qualcomm Snapdragon 660 octa-core, 2.2 GHz
Operating System	Android 11
RAM	4 GB
Storage	32 GB Flash
Battery	7000 mAh
Connectivity	USB 2.0
Camera	13 MP rear camera
Drop Specification	Multiple 8 ft. / 2.4 m drops to concrete per MIL-STD 810G across operating temperature range
Sealing	IP65
Touch Panel	Capacitive Corning Gorilla Glass
Keypad Options	Numeric, Function Numeric, Alpha-Numeric
Scanning	1D/2D
Wireless LAN	802.11 a/b/g/n/ac
Audio	Speaker, microphone
Display	4.3 in. WVGA (800 x 480), color TFT-LCD with backlight