Accessories
33
The MC93XX’s Charge LED indicates the status of the battery charging in the device. See LED Charge
Indicators for charging status indications.
The 7,000 mAh PowerPrecision+ standard battery charges from 0% to 90% in less than 3.5 hours at room
temperature using a Zebra accessory.
Spare Battery Charging
The Spare Battery Charging LED on the cup indicates the status of the spare battery charging. The 7,000 mAh
(typical) battery charges from fully depleted to 90% in approximately 3.5 hours.
In many cases the 90% charge provides plenty of charge for daily use.
To achieve the best fast charging results use only Zebra charging accessories and batteries.
Table 5 LED Charge Indicators
Status Indications
Off • The battery is not charging.
• The device is not inserted correctly in the cradle or connected to a
power source.
• Cradle is not powered.
Slow Blinking Amber
Every 3 seconds
• Battery is charging, but the battery is fully depleted and does not yet
have sufficient charge to power the device.
Solid Amber • Battery is charging.
Solid Green • Battery charging is complete.
Fast Blinking Red
2 blinks/second
Charging error. For example:
• Temperature is too low or too high.
• Charging has gone on too long without completion (typically eight
hours).
Solid Red • Battery is charging and battery is at the end of useful life.
• Charging complete and battery is at the end of useful life.
Table 6 Spare Battery LED Charging Indicators
State Indication
Off • The battery is not charging.
• The battery is not inserted correctly in the cradle.
• Cradle is not powered.
Solid Amber • Battery is charging.
To Next Page
Loading...
Need help?
General
