Zebra MC93 Series Integrator Guide

Accessories
51
Installing the Hand Strap
To install the hand strap:
1. Thread and
pull‐throughtheshortsectionthroughthe opening near the base of the trigger handle.
Figure 41 Insert Loop Through Handle Slot
2. Thread and
pull‐throughthelongersectionthroughthe opening near the battery.
Figure 42 Pull-through Hand Strap Near Battery
3. Attach the two plastic ends together.
Figure 43 Attach Plastic Ends Together

Zebra MC93 Series Specifications

General

Brand	Zebra
Model	MC93 Series
Category	PDA
Language	English