Zebra MC93 Series - USB Communication; Introduction; Transferring Files with a Host Computer via USB; Transferring Files

To Next Page

To Previous Page

USB Communication

Introduction

This chapter provides information for transferring files between the device and a host computer.

Transferring Files with a Host Computer via USB

Connect the device to a host computer using a USB cradle to transfer files between the device and the

host computer.

When connecting the device to a host computer, follow the host computer’s instructions for connecting

and disconnecting USB devices, to avoid damaging or corrupting files.

Transferring Files

NOTE: Use Transfer files to copy files between the device (internal memory) and the host computer.

1. Place the device into a USB cradle or into the USB snap on cup.

2. Pull down the Notification panel and touch USB charging this device.

By default, Charge this device is selected.

Figure 85 Use USB to Dialog Box

3. Touch Transfer files.

4. On the host computer, open a file explorer application.

5. Locate the device as a portable device.

Other manuals for Zebra MC93 Series