CHAPTER 1 GETTING STARTED
This chapter provides information for getting the device up and running for the first time.
Unpacking
1. Carefully remove all protective material from the TC56 and save the shipping container for later storage and
shipping.
2. Verify that the following were received:
• TC56 touch computer
• 4,300 mAh PowerPercision+ Lithium-ion battery
• Regulatory Guide.
3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Global Customer
Support center immediately.
4. Prior to using the TC56 for the first time, remove the protective shipping film that covers the scan window,
display and camera window.
To Next Page
Loading...
