Zebra TC57 - Using the Manufacturing Example

Applications
129
Using the Manufacturing Example
1. Print the Manufacturing form. See Printing the Sample Forms.
Figure 97 Manufacturing Form
2. Place the form on a flat surface.
3. On the device, launch SimulScan Demo app.
4. Touch the Menu icon in the top right corner of the screen.
5. Touch Manufacturing.
6. Touch Start SimulScan.
7. Point the top of the device at the document and center the target on the document.
8. Hold the device steady.
9. The device starts the data capture. When completed, the device beeps and the data from the document
displays.