16
Getting Started
Introduction
This chapter provides information for getting the device up and running for the first time.
Unpacking
1. Carefully remove all protective material from the device and save the shipping container for later storage
and shipping.
2. Verify that the following were received:
• touch computer
• 4,150 mAh (typical) / 3,840 mAh (minimum), 15.89 Wh PowerPrecision+ Lithium-ion battery
• Regulatory Guide.
3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Global Customer
Support center immediately.
4. Prior to using the device for the first time, remove the protective shipping film that covers the scan window,
display and camera window.
To Next Page
Loading...