Zebra TC57 - Device Central Tabs; Paging an RS6000 Ring Scanner

Applications
94
Device Central Tabs
• Peripherals Tab - displays all currently connected and previously connected peripherals. Connected
peripherals display the length of time (in minutes) that they have been connected. When an RS6000 is
connected the Page button displays. See Paging an RS6000 Ring Scanner.
Touch the peripheral information to display the Device Details screen.
• Device Details - displays detailed device information for the selected peripheral.
• My Device Tab - displays information about the device and the current version of Device Central.
• Device Details - displays the Phone status screen.
• Device Battery Details - displays the Battery screen.
Figure 71 Peripherals Tab
Paging an RS6000 Ring Scanner
Use Page button to easily locate the currently connected RS6000 Ring Scanner:
1. With the RS6000 Ring Scanner connected, swipe up from the bottom of the Home screen, and touch .
NOTE: The RS6000 Ring Scanner must be within 10 m (32 ft) of the device.
2. Under the RS6000 peripheral information, touch Page to page the RS6000. The paged RS6000 beeps and
vibrates.