151
3. On the device swipe up from the bottom of the Home screen and touch .
Figure 128 Bluetooth Pairing Utility
4. Using the RS507/RS6000, scan the bar code on the screen.
The RS507/RS6000 emits a high/low/high/low beeps. The Scan LED flashes green indicating that the
RS507/RS6000 is attempting to establish connection with the device. When connection is established, the
Scan LED turns off and the RS507/RS6000 emits one string of low/high beeps.
A notification appears on the device screen and the icon appears in the Status bar.
5. On the device touch .
Pairing Using Bluetooth Human Interface Device
To pair the RS507/RS6000 with the device using HID:
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable mode.
3. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
4. Place the RS507/RS6000 in Human Interface Device (HID) mode. If the RS507/RS6000 is already in HID
mode, skip to step 5.
a. Remove the battery from the RS507/RS6000.
b. Press and hold the Restore key.
c. Install the battery onto the RS507/RS6000.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
