Zebra TC57 - Setup; Installing the SIM Card

Getting Started
19
Setup
Perform this procedure to start using the device for the first time.
1. Install a micro secure digital (SD) card (optional).
2. Installing a nano SIM card (optional)
3. Install hand strap (optional).
4. Install the battery.
5. Charge the device.
6. Power on the device.
Installing the SIM Card
NOTE: Only use a nano SIM card.
CAUTION: For proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD precautions
include, but not limited to, working on an ESD mat and ensuring that the user is properly grounded.
1. Remove access cover.
Figure 3 Remove Access Door
2. Slide the SIM card holder to the unlock position.
25 Exit Window Provides data capture using the imager.
26 Headset Jack For audio output to headset.
27 Programmable Button Programmable.
Table 2 Back View Features (Continued)
Number Item Function