Getting Started
23
Figure 13 Insert microSD Card in Holder
5. Close the microSD card holder and slide into the lock position.
Figure 14 Re-install Access Door
CAUTION: Access door must be replaced and securely seated to ensure proper device sealing.
6. Re-install the access door.
Figure 15 Replace Access Door
Installing the Battery
NOTE: User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc.,
may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress
Protection (IP)), impact performance (drop and tumble), functionality, temperature resistance, etc. could be effected. DO
NOT put any labels, asset tags, engravings, stickers, etc. in the battery well.
1. Insert the battery, bottom first, into the battery compartment in the back of the device.
To Next Page
Loading...