Accessories
202
1. Rotate the device to one side.
Figure 175 Remove Device from Rugged Charge/USB Cable
2. Push the Rugged Charge/USB Cable to the other side.
3. Remove the device from the Rugged Charge/USB Cable.
Battery Charging
Main Battery Charging
The device’s Charging/Notification LED indicates the status of the battery charging in the device. See Table 3
on page 21 for device charging status. The battery charges from fully depleted to 90% in approximately 2.5
hours and from fully depleted to 100% in approximately three hours.
NOTE: In many cases the 90% charge provides plenty of charge for daily use. A full 100% charge lasts for approximately
14 hours of use.
To achieve the best fast charging results use only Zebra charging accessories and batteries. Charge batteries at room
temperature with the device in sleep mode.
Main Battery Charging
The device’s Charging/Notification LED indicates the status of the battery charging in the device.
NOTE: Charging using a host computer USB port or a power supply other than the Zebra PWR-WUA5V12W0xx could take
longer. See Table 13 on page 172.
Non-Zebra power supply must provide 5 VDC @ 2.5 A.
The 4,300 mAh (typical) / 4,050 mAh (minimum) battery charges from fully depleted to 90% in approximately
2.5 hours and from fully depleted to 100% in approximately three hours.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
