Printer Setup
23
5.
Slide in the media guide until it just touches the edge of the media.
6. Does the media that you are using require ribbon for printing? If you are not sure, see Ribbon on
page 11.
7. Rotate the printhead-open lever downward until it locks the printhead in place.
If using… Then…
Direct Thermal media (no ribbon needed) Continue with step 7.
Thermal Transfer media (ribbon needed) a. If you have not already done so, load ribbon in
the printer. See Load the Ribbon on page 48.
b. Continue with step 7.
To Next Page
Loading...