Printer Setup
41
16.
Does the media that you are using require ribbon for printing? If you are not sure, see Ribbon on
page 11.
17. Rotate the printhead-open lever downward until it locks the printhead in place.
18. Close the media door and the rewind base door.
19. Set the printer to Rewind mode (for more information, see Print > Label Position > Collection Method on
page 77).
If using… Then…
Direct Thermal media (no ribbon needed) Continue with step 17.
Thermal Transfer media (ribbon needed) a. If you have not already done so, load ribbon in
the printer. See Load the Ribbon on page 48.
b. Continue with step 17.
To Next Page
Loading...