Zebra ZT510 - Page 107

107
Printer Configuration and Adjustment
Adjust Printer Settings
6/28/17 ZT510 User Guide P1095460-001
User Menus The following are the printer’s user menus and the menu items that appear in
each. Click any menu item to go to its description. For navigation instructions, see Navigating
through Screens in the Standard Display on page 19.
NETWORK
— ACTIVE PRINT SERVER
— PRIMARY NETWORK
— WIRED IP ADDRESS
— WIRED SUBNET MASK
— WIRED GATEWAY
— WIRED IP PROTOCOL
— WIRED MAC ADDRESS
— WLAN IP ADDRESS
— WLAN SUBNET MASK
— WLAN GATEWAY
— WLAN IP PROTOCOL
— WLAN MAC ADDRESS
— ESSID
— CHANNEL
— SIGNAL
— IP PORT
— IP ALTERNATE PORT
— PRINT INFORMATION**
— RESET NETWORK
— VISIBILITY AGENT
— LOAD DEFAULTS
— RFID MENU*
RFID
NOT SUPPORTED
TOOLS
— PRINT INFORMATION**
— IDLE DISPLAY
— POWER UP ACTION
— HEAD CLOSE ACTION
— LOAD DEFAULTS
— MEDIA/RIBBON CAL**
— DIAGNOSTIC MODE
— ENERGY STAR
— CONFIG INFO TO USB
— ZBI ENABLED?
— RUN ZBI PROGRAM
— STOP ZBI PROGRAM
— PRINT USB FILE
— COPY USB FILE TO E:
— STORE E: FILE TO USB
— PRINT STATION
— PASSWORD PROTECT
— PRINT TEST FORMAT
— NETWORK MENU*
SETTINGS
— DARKNESS
— PRINT SPEED
— MEDIA TYPE
— PRINT METHOD
— TEAR OFF
— PRINT WIDTH
— PRINT MODE
— LABEL TOP
— LEFT POSITION
— REPRINT MODE
— LABEL LENGTH MAX
— LANGUAGE**
— TOOLS MENU*
PORTS
— BAUD RATE
— DATA BITS
— PARITY
— HOST HANDSHAKE
— WML
— BLUETOOTH MENU*
BLUETOOTH
— BLUETOOTH ADDRESS
— MODE
— DISCOVERY
— CONNECTED
— BT SPEC VERSION
— MIN SECURITY MODE
— SETTINGS MENU*
SENSORS
— SENSOR TYPE
— MEDIA/RIBBON CAL**
— PRINT INFORMATION**
— LABEL SENSOR
— TAKE LABEL
— PORTS MENU*
LANGUAGE
— LANGUAGE**
— COMMAND LANGUAGE
— COMMAND CHAR
— CONTROL CHAR
— DELIMITER CHAR
— ZPL MODE
— VIRTUAL DEVICE
— SENSORS MENU*
* Denotes a shortcut to the next user menu.
** Appears in multiple user menus for your convenience.