Zebra ZT510 - STORE E: FILE TO USB

135
Printer Configuration and Adjustment
Adjust Printer Settings
6/28/17 ZT510 User Guide P1095460-001
TOOLS > STORE E: FILE TO USB
Select files from the printer to store on a USB Flash drive. See the exercises in Using a USB
Host Port and the NFC Capabilities on page 247 for an exercise using this capability.
To copy files from the printer to a USB Flash drive:
1. Insert a USB Flash drive into the printer’s USB host port (available as an option).
The printer lists available files.
SELECT ALL is available to store all files available files
from the printer on the USB Flash drive.
2. Use the UP ARROW or DOWN ARROW to select a file from this menu.
3. Press RIGHT SELECT to select STORE.
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ENERGY STAR
—
CONFIG INFO TO USB
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
PRINT TEST FORMAT
* This menu item can be used only if a USB Flash drive is inserted into
an optional USB host port on the printer.
SGD command used: usb.host.write_list